Heat Shield High Albedo upper deck Solar Heat Radiant Barrier
Heat Shield is an ultra premium, elastomeric, single component, high albedo upper deck coating. It is a cool roof Green coating. Heat Shield is formulated with high albedo ingredient and superior hiding ability. This patented formulation is formulated by our own Thermal Engineering Experts and Enviro caring Chemists. Heat Shield is an excellent upper deck Solar Heat Radiant Barrier. It also insulates the solar heat and reflects the solar infra red, ultra violet and visible rays. In cool roof physics, Solar Reflectance Index (SRI) value, Infra red heat radiated (e) value, Thermal Resistance (R) value are the three important factors to determine the coolness of the building interior. Heat Shield has high solar reflective index, very high emissivity, minimum high thickness R value film, exceptional tensile and elongation.
What a cool roof can do for the environment...
What a cool roof can do for the environment...
- Cool roofing helps to reduce ozone and smog by lowering peak summer temperature in metropolitan areas. (For every (-)17.22o C / 1o F rise in air temperature, smog increases 3 %.)
- Studies have shown that the wide spread use of cool roofing could potentially save $21 billion, in direct energy usage costs and peak demand charges.
- Cool roofs reduce landfill usage because they can often be applied directly over existing roofs, eliminating the need for tear-off.
Special accreditationHeat Shield is fully tested in accordance with ASTM (American Society for Testing Materials), compliance with USGBC (United States Green Building Council) Building codes, CRRC (Cool Roof Rating Council) Standard codes and Energy Conservation programmes accordance with U.S Department of energy and environmental protection. Heat Shield is waiting for Energy star labeling.
Heat Shield is approved by USGBC as green coating and rated as Gold Star. We are the first Indian Company in getting this approval and rating from USGBC. We have done the Heat Shield Green Coating in the world’s 14th and India’s first 100 Ton solar air-conditioned, USGBC certified Green Building.
To find more information about cool roof, visit www.usgbc.org , www.energystar.gov, www.coolroofs.org.
- Approved and rated as Gold Star by USGBC
- Low ‘R’ value causes very low thermal conductivity
- High ‘e’ value causes high rejection of radiation
- Water safe and non toxic
- Washable and durable
- No Volatile Organic Compounds (VOC)
- Eco friendly Green coating
- $0.20 tax rebate per sq.ft as per EPA law at USA
- Greater Occupant comfort
- Greater Building comfort
- Reduces cold down time of ceiling, walls and occupancy in HAVC buildings
- Decreases the size and reduced equipment wear of the air conditioning system
- Saves cooling energy bills
- Prevents the roof from hairline crack, seepage, mildew and algae
- Saves the building from thermal shocks
|PHYSICAL PROPERTIES||STATE||ASTM *|
|Shelf life||Two years|
|Abrasion resistance||6000 cycles|
|Weight per litre||900 gms.On wet condition||D-1475|
|VOC – Evaporation||0 Calculated|
|Specific gravity||1.2 ρ / ρH2O (3)|
|Viscosity||400 – 500 cP||D-562|
|Permeability||1.98 Metric perms @1 mm.||E-96|
|Tensile strengths||3 kg./cm2||D-828|
|UV Reflection||90 %||C-1549-04, E903-96|
|Reflective Index||92 @ 700 nm||E-1980-01|
|Emittance||0.90 - 0.97||E408-71|
|Convection coefficient||1.2 @ 32ºC|
|Surface drying time||@ 30ºC - 1 hr|
|Dry time of water resistance||@ 30ºC - 4 hrs.|
|Dry film thickness||110 microns @ single coat|
|* - Ask for certifications|
Temperature Log sheetThermal log sheet, for our energy audit before and after Heat Shield application at Sir Mutha Venkata Subba Rao Concert Hall, Madras Seva Sadan, Harrington Road, Chetpet, Chennai
|Sl.No.||Reading Hour||Roof Temperature
Non coated area
Test has shown that the surface temperature of Galvalume roof is reduced by 13 °C, resulting in a drop of up to 9 °C in the temperature in occupancy area of a 120 Ton A/c auditorium and save HAVC energy bills!
Surface preparationYou can easily apply by yourselves or your house painter. All types of surfaces must be cleaned from mildew, algae, grease and dirt. For tough substrate clean with chlorine bleach treatment. Use metal wire brush for scrubbing the fungus, algae and mildew.
ApplicationHeat Shield is ready to use. Mild thinning is recommended for smooth application. Use pure water as thinner. Containers should not be kept opened for longer period. Heat Shield can cover 50-100 Sq fts per liter in single coat according to the smoothness of the substrate. Two coats are normally recommended. For better results apply three coats on rough surface. Cover the parapet walls also. Leave three hours interval between every coat as curing time. Sprinkle potable water gently before each coating. Heat Shield can be applied with good quality synthetic brush or roller or sprayer. After application, wash your hands and tools with ordinary plain water. If it sprinkles on your face or eyes, wash with plain water several times thoroughly.
For direct application, we have our own team. The cost is subject to roof survey, cleaning, material, application, overseeing and transport. For more details please contact info@Cool Home Solutions.com
CautionMore attention must be paid while working on Asbestos, PVC, Fibre roofings, as this type of roofs will be broken easily. Use Helmets and safety belts.
Application areaHeat Shield is suitable for all types of industrial and commercial buildings and residential dwellings. Typical domestic application includes house roofings, steel garages, garden sheds, and exterior walls. It can be applied in warehouses, factories, broiler farms, shipping containers, pipelines, storage tanks and silos. Heat Shield is especially formulated for maximum performance on Galvalium, Galvanized iron, mild steel, asbestos sheets, timber and concrete roofs.
WarrantyAfter the application, the coating will not get peeled off or any crack. This is subject to the preparation of the surface, thinning of material, thinning water quality, (use only RO water as thinner in 4:1 ratio). Heat Shield warrants four years performance warranty. For our direct application more than 15,000 Sqfts, Cool Home Solutions warrants eight years, against AMC. This contract ensures performance test, reading and measures, thermal coefficient conditions, energy audit and maintenance. Actual duty pay and allowances per day / per person levied at the time of execution. For AMC details please contact info@Cool Home Solutions.com. This warranty will not applicable for Asbestos, Fibre, PVC, and other synthetic roofings.
Heat Shield is available in 4, 10, 20 liter sealed pails. It is not available in any hardware stores, to avoid adulteration. You can purchase directly from us or our authorized direct sales associates. For more details, please contact info@Cool Home Solutions.com.
Beware of lime or cem powders + adhesive, white distemper and emulsion, which are sold by fly by night companies. These are injurious to health, environment, rain water harvesting, and money. Trust, the one and only USGBC approved, Gold star rated, CRRC compliance, ASTM tested Heat shield – the Solar Heat Radiant Barrier Reflective Green Coating in India.
VIGILANCE & COMPLAINTS:
If you find anyone duplicates our Approval Logos, brand name and product or any complaint with our Direct Marketing Associates or our Direct Applicators, in any manner, do not hesitate to contact: info@Cool Home Solutions.com.